Water Heater Expansion Tanks: What They Do and When You Need One

A Jones Services utility van parked in a residential driveway for AC services in Goshen, NY, in front of a house.

A water heater expansion tank is a small tank on the cold water line that absorbs the extra volume created when water heats up. You need one when your plumbing is a closed system, meaning a check valve or pressure-reducing valve keeps that expanded water from flowing back into the city main. Many local codes now require one in that situation.

Why Water Needs Somewhere to Go

Water expands as it heats. In an older open system, that extra water could flow back toward the city main. Many homes now have a backflow preventer, check valve, or pressure-reducing valve on the incoming line. Those devices block the backward flow, so the pressure has nowhere to go. Each time the water heater runs, pressure in your plumbing spikes.

An expansion tank has an air cushion behind a rubber diaphragm. As water expands, it pushes into the tank and compresses the air, which keeps the pressure steady.

Do You Need One?

You likely need an expansion tank if:

  • You have a pressure-reducing valve or check valve on your main water line
  • Your water utility installed a backflow preventer at the meter
  • Your local code requires one with a new water heater

Homes on private wells already have a pressure tank. Whether you also need a thermal expansion tank depends on how the system is set up, so ask your plumber.

Signs of Thermal Expansion Problems

  • The water heater’s relief valve drips or releases water
  • Toilets run briefly on their own after hot water is used
  • Faucets drip, or fixtures wear out faster than they should
  • Water pressure spikes after the water heater runs

Signs Your Expansion Tank Is Failing

  • The tank sounds solid when you tap it all the way up. A healthy tank sounds hollow on the air side.
  • Water comes out of the air valve when you press it. That means the diaphragm has failed.
  • The relief valve has started dripping again.

Most expansion tanks last several years. A failed tank is replaced, not repaired.

Installation Basics

The tank mounts on the cold water supply line near the water heater and must be supported so its weight doesn’t strain the pipe. Its air charge is set to match your home’s water pressure before it’s installed. A tank with the wrong air pressure won’t do its job.

Get Your Water Heater Checked

Jones Services has worked on plumbing across the Hudson Valley since 1986. Our licensed plumbers can check your water pressure, install or replace an expansion tank, and make sure your water heater is set up to code, with upfront pricing. Learn more about our plumbing repair services.

Checkbox Items
Schedule Now
Checkbox Items